Archive for the 'IPv6' Category

So I tried again

Published
by
Conor
2 years, 1 month ago
in IPv6, Networking and Tech
. 0 Comments

And gave AICCU another chance.

C:\Documents and Settings\Conor>ping ftp.ipv6.heanet.ie

Pinging ftp.ipv6.heanet.ie [2001:770:18:aa40::c101:c140] with 32 bytes of data:

Reply from 2001:770:18:aa40::c101:c140: time=15ms
Reply from 2001:770:18:aa40::c101:c140: time=14ms
Reply from 2001:770:18:aa40::c101:c140: time=15ms
Reply from 2001:770:18:aa40::c101:c140: time=15ms

Ping statistics for 2001:770:18:aa40::c101:c140:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 14ms, Maximum = 15ms, Average = 14ms

Shame I can’t figure out why its not saying connected on my WRT54G and dishing out connectivity that way but this will do for the time being. So I’m gonna have to dig about and see if I can get v6 connectivity to my VPS at XenPlanet. So if anyone has any tips I’d be grateful.

IPv6 baby

Published
by
Conor
2 years, 2 months ago
in IPv6, Networking and Tech
. 0 Comments

root@edge:~# ping6 ftp.heanet.ie
PING ftp.heanet.ie (2001:770:18:aa40::c101:c140): 56 data bytes
64 bytes from 2001:770:18:aa40::c101:c140: icmp6_seq=0 ttl=62 time=16.7 ms
64 bytes from 2001:770:18:aa40::c101:c140: icmp6_seq=1 ttl=62 time=17.0 ms
64 bytes from 2001:770:18:aa40::c101:c140: icmp6_seq=2 ttl=62 time=15.8 ms
64 bytes from 2001:770:18:aa40::c101:c140: icmp6_seq=3 ttl=62 time=16.9 ms

This was taken from my new WRT54GL router about 30 seconds ago. Its nice to see the packet loss report on Sixxs to drop from 100% to 0%
I’ve gone to Sixxs and now requested a /48 now for my home network. Time will tell how this turns out, this is quite a learning experience for me, I never really got into IPv4 that much so might as well start fresh with IPv6!